Allan W. Lefevre
Senior Electrical Designer

Graduated from Danforth Technical High School (Grade 12) in Toronto in 1968.

Completed "AutoCAD Release 12" training program in 1993.

Forty Five years experience of electrical design.
 

WORK EXPERIENCE:

September 1998 to Present E&I Engineering Ltd. , Fredericton, N.B.

• Completed 3D models and associated 2D drawings for tray layouts, lighting design, underground duct system, grounding system, as well as the schematics, junction box drawings and loop drawings for a Rock Crushing System for Atlantic Wallboard.

• Competed 3D models and associated 2D drawings for tray layouts, lighting design, underground duct system, grounding systems and PLC cabinets for a 160000#/hour hog fuel boiler at Lake Utopia Paper.  

• Revised plant PPID’s for Lake Utopia Paper. 

• General drafting for the fryer upgrade at Cavendish Farms. 

• General electrical drafting for the Irving Pulp and Paper Soot Blower Project. 

• Prepare cable tray layouts, instrument layouts, junction box drawing’s, loop drawing’s, etc. for a Dregs Washing Project at IPPL. 

• Prepared fibre optic junction box layouts and plant location drawing’s for the Irving Pulp and Paper Fibre Optic Systems. 

• General drafting for the completion of the wiring design to facilitate the DCS LCN split at Irving Pulp and Paper. 

• Preparation of schematics and wiring diagrams for the Irving Pulp and Paper Maintenance Arc Flash System. 

• Completed equipment and grounding layouts power, control and instrumentation cable tray design, lighting, grounding, motor locations and building services for the addition of the 4th Diaper Line at Irving Personal Care. 

• Completed equipment and grounding layouts power, control and instrumentation cable tray design, lighting, grounding, motor locations and building services for the Sludge Press at Lake Utopia Paper. 

• Completed equipment and grounding layouts for Sub 60C, power, control and instrumentation cable tray design, lighting, grounding, motor locations and building services for the Infeed building and Firing End building for the New Lime Kiln Project at Irving Pulp & Paper, Saint John, NB. These drawing were completed in a 3-D format. 

• Completed electrical equipment layout for main electrical room, cable bus, power and control cable tray design, high bay lighting for warehouse and production areas, exterior roadway and building flood lighting design and building services design for warehouse and production areas, IPC 2003 Project, Moncton, NB. 

• Completed transformer, cable bus layouts and sections, power and control cable tray design, new electrical equipment layout and building services design for electrical room 84 for unit sub #2 replacement for Power System Upgrade at  Lake Utopia Paper, St. George, NB.

• Completed cable bus, control tray design and new 5Kv switchboard layout for Power System Upgrade at Lake Utopia Paper, St. George, NB.

• Marshalling panel design and cable tray designs for a major  petrochemical plant in Montreal Quebec.
• Cable bus, power tray design and new electrical sub 83 layout  and building services for Power System Upgrade at  Lake Utopia Paper, St. George, NB 
• Completed marshalling panel design, power and instrumentation cable tray design for Digester Upgrade at Irving Pulp & Paper, Saint John, NB. 
• Completed marshalling panel design and instrumentation cable tray design for Recovery TDC2000 Upgrade at Irving Pulp & Paper, Saint John, NB. 
• Completed marshalling panel design and cable tray designs for marshalling and rack rooms at a major petrochemical plant. 
• Completed power layouts for installation of an electrical system upgrade project for TM#1 at Irving Tissue Company, Saint John, NB. This involved detailed design of a new power distribution and substations in an existing mill.  
• Completed design of cable layouts for marshalling of all field cabling to a DCS for up to three different locations for a major oil refinery expansion project. 
• Completed lighting and power design for Brookville Transport Maintenance Facility.

1993 – 1998 Neill and Gunter Limited, Fredericton, N.B.

• Completed power layouts for installation of Primary, Secondary and Tertiary Screens on # 5 and # 6 Paper Machines – Fraser Paper Inc. – Madawaska, Maine.
• Completed power layouts for installation of Wire/Couch Drive and Drives for Paper Rolls # 1 and # 4 on # 14 Paper Machines – S.D. Warren – Westbrook, Maine.
• Completed lighting and power design for various projects. Latest project -Oriented Strand Board Plant Facility for International Paper, Jefferson, Texas.

• Responsibilities included project estimating, material ordering, shop drawings and site supervision of various projects.

• Preparation and drafting of electrical drawings for oriented strand board mills and pulp and paper mills.
• Lighting and power design for many projects in the oriented strand board and pulp and paper industries.
• Electrical preliminary estimates and preparation of bills of materials for a number of projects in the oriented strand board and pulp and paper industries.
• Preparation of cable schedules, equipment lists and drawing transmittals.

• Preparation of Electrical drawings for a new woven line.

• Worked for Montreal Engineering and Bechtel Engineering preparing electrical drawings for various projects.

• Draftsman – preparation of electrical drawings for a new concentrator.

• Draftsman – preparation of electrical drawings for several mining projects.

• Junior Draftsman – preparation of electrical drawings for various electrical substation upgrades.

Skills:

• Drafting using "AutoCad 14", "Auto Cad 98 LT", "AutoCAD Release 2000" 
• Excel 
• Lighting Design 
• Power Design 
• Cable tray Design 
• Grounding Design 
• Electrical Cost Estimating 
• Have worked successfully with various design teams and clients for completion of various projects on time and within budget.